Sign up for our Technology Newsletter 
AMD Makes More Cuts
There have been some rumors that AMD plans to drop prices on its older generation APUs as well as some AM3 Athlon II CPUs and as of yesterday, the new price list confirmed those cuts. Unfortunately the price cuts are not that impressive on the FM1 side but some AM3 Athlon II CPUs have seen a price reduction of over 30 percent.
The full list includes a total of six A-Series APUs and twelve AM3 Athlon II CPUs. The most impressive price cut in the A-Series was on the A4-3300 APU for 21.7 percent, or from US $46 down to US $36. The flagship A8-3870K got cut down by 9.9 percent while A6-3670K was cut down by far less impressive 3.7 percent.
The most impressive price cuts on the AM3 Athlon II side is on the Athlon II X4 640 and the Athlon II X2 265. The Athlon II X4 640 got cut down from US $98 to US $67, or 31.6 percent, while Athlon II X2 265 got cut down from US $69 to US $48, or 30.4 percent.
Two Athlon II CPUs, the X3 445 and the X4 638, were removed from the price list as they were most likely discontinued.
You can check out the full list and price cuts over at CPU-World.com.
AMD Goes Piledriver
AMD has released its Piledriver desktop
processors codenamed Vishera.
AMD showed off Vishera at IDF last month, an overclocked chip running at 5GHz. Now the company has taken the wraps off its eight-core Vishera chip, a processor that it hopes will finally bury memories of its disappointing Bulldozer Zambezi chip.
AMD’s Vishera processors will continue to use Socket AM3+, meaning it is a drop-in upgrade for those customers lumbered with Zambezi processors.
The firm announcing four models all branded with the FX moniker. The low-end Vishera chip is the quad-core FX-4300 clocked at 3.8GHz boosted up to 4.0GHz, with 4MB of Level 3 cache.
The firm has kept feature parity throughout its Vishera FX range aside from core count and total Level 3 cache. Therefore AMD’s six-core FX-6300 still sports the same 1MB of Level 2 cache per core but has a total Level 3 cache of 8MB and is clocked at 3.5GHz that can be boosted up to 4.1GHz.
AMD’s top two Vishera parts, the FX-8320 and FX-8350 sport eight cores and have 8MB of Level 3 cache. The difference between the two chips is their clock frequencies, with the FX-8320 running at 3.5GHz and boosted to 4.0GHz while the FX-8350 is clocked at 4.0GHz and is boosted to 4.2GHz.
The firm’s decision to clock its FX-8320 and FX-8350 so closely is largely academic, as all Vishera chips feature an unlocked multiplier. AMD even plays up the overclockability of Vishera and touts 5GHz as being reachable with water cooling. Insiders have even said it can reach 5GHz with strong air cooling.
As for AMD’s Piledriver architecture, the firm claims it offers improved branch prediction and improvements to Level 2 cache efficiency and scheduling. Overall the company is sticking to its longstanding line that Vishera is a 15 percent performance increase over Bulldozer, and while that might well be true, Bulldozer was so far behind its competition in single-threaded performance that a 15 percent gain is needed simply to achieve parity, let alone a lead.
AMD Makes Cuts
AMD has cut its third quarter revenue and gross margin forecasts citing weak demand.
AMD’s lacklustre Bulldozer processor line has left the firm desperately trying to compete with Intel in the desktop market while its more impressive accelerated processor unit (APU) range has been rebuffed by Intel’s multi-million dollar ultrabook marketing push. Now AMD has revised down its estimate of third quarter revenues, which it says will be around 10 percent lower than the previous quarter.
Even more worrying for AMD is its lower forecast for gross margin, the difference between selling an item and the cost to make it, down from 44 percent to 31 percent. Effectively AMD said its cost of doing business has risen considerably higher, although it laid most of the blame on an $100m inventory writedown.
AMD couldn’t avoid admitting the blindingly obvious and said that its writedown of inventory was due to “lower anticipated future demand for certain products”. The firm has suffered through a disappointing 2012, and earlier this year it announced a $580m loss back in April.
AMD And BlueStacks Join Forces
AMD has joined forces with BlueStacks in an effort to bring Android apps to Windows tablets. BlueStacks is the outfit behind Android App Player, a Windows app that enables users to run Android apps on tablets.
Since AMD is not in the ARM game, it could obviously benefit from bringing some popular Android apps to Windows, allowing users to play a few levels of Bad Piggies on Hondo tablets.
However, apps have to be vetted before users can take end up on the AMD AppZone, but it is also possible to install other applications.
The BlueStacks Android Player will also run on Windows 7 and Windows 8 PCs, and it even supports Windows XP.
In the long run, the possibility of running Android apps could be very interesting for consumers thinking about getting a Windows 8 tablet, as it will combine Microsoft’s unmatched enterprise solutions with fun and popular Android apps. Provided the whole thing works as advertised, of course.
AMD Confirms Trinity’s New Specs
AMD has confirmed the specifications of its Trinity accelerated processor units (APUs), with the majority being quad-core units with 4MB cache.
AMD launched its mobile Trinity APUs earlier this year in a bid to cash in on “back to school” sales and now it has detailed the specification of Trinity processors that will slot into desktop systems. The firm confirmed that Trinity has moved from Socket FM1 to Socket FM2 and save for two A4 and A6 SKUs the chips will all be quad-core parts with base frequencies over 3GHz.
AMD stuck with its A4, A6, A8 and A10 branding with the dual-core A4-5300, base clocked at 3.4GHz with turbo mode pushing that up to 3.6GHz and 128 graphics cores clocked at 723MHz at the foot of AMD’s APU line-up. Next up the firm has the unlocked dual-core A6-5400K, which not only bumps the CPU clock speed by 200MHz to 3.6GHz and 3.8GHz for base and turbo modes, respectively, but increases the number of graphics cores to 192 and their frequency to 760GHz.
While AMD’s A4 and A6 Trinity processors are dual-core, the four other chips in the range are all quad-core parts, with the A8-5500 and A8-5600K sporting base clock speeds of 3.2GHz and 3.6GHz, respectively, with turbo mode boosting those to 3.7GHz and 3.9GHz, respectively. The firm has kept the number of graphics cores on both chips the same at 356 and clocked them at 760MHz, however the higher frequency on the A8-5600K means that the firm bumped up the TDP to 100W, though given it is unlocked, the factory TDP is largely academic.
AMD’s A10 chips follow in the same vein as the A8 parts, with the 65W A10-5700 part clocked at 3.4GHz, boosted to 4GHz while the 100W A10-5800K part has its clocks set at 3.8GHz and boosted to 4.2GHz. AMD has given both processors 384 graphics cores clocked at 800MHz.
AMD Details Vishera
AMD will launch three eight-core processors led by the AMD FX 8350 but it also plans to launch two six-core processors for people who like to spend a bit less.
The AMD FX6350 is a 125W six-core with a 3.9GHz base clock and 4.2 maximum turbo core clock. It comes with 14MB of cache, supports DDR 3 1866 and comes in AM3+. Naturally this is a 32nm SOI product just as its predecessor as AMD is not ready for 22nm fun yet.
The runner up is a 3.5GHz clocked six core that turbos to 4.1GHz, all that while staying in 95W TDP envelope. The name is FX 6300 and these two boys should launch together. The rest of the specification is the same as with faster brother. These two processors will replace the Zambezi based FX 6120 and FX 6100. These parts as well as FX 6200 that is also a part of Zambezi legacy are all selling between $190 and $250 which is definitely not a lot of money for quite powerful processors.
AMD’s 8350 Clocked At 4.0GHz
We have got some information about AMD’s upcoming FX 8350.
However, today we learned that AMD will push this CPU from Q3 to early Q4 2012 as now it claims that it can launch this processor in late October. AMD FX 8350 is an eight-core with 16MB cache, Vishera based 32nm core with 4.0GHz default clock and ability to jump to 4.2GHz with turbo core automatic overclocking.
This is an impressive frequency jump as the AMD FX 8150 works at 3.6GHz default and with turbo gets to 4.2GHz. The FX 8350 is supposed to replace the 8150 as AMD’s flagship processor.
According to current schedule production ready samples are expected in roughly a month (early August). Mass production starts in early August, probably days after they finalize the clocks and give it a green light for mass production but the launch is pushed for late October 2012.
AMD Officially Launches Trinity Mobile
AMD has finally and officially lifted an NDA veil off its mobile Trinity A-series APU lineup based on the 2nd-gen Bulldozer CPU core, aka Piledriver, and VLIW4 Northern Islands GPU squeezed together on a 32nm SOI die.
Architecture-wise, AMD’s Trinity combines two to four Piledriver x86 cores combined with up to 384 VLIW4 Radeon cores on a 32nm die which ends up as a 246mm2 chip with 1.303B transistors, slightly more than Llano’s 228mm2/1.178B. Since it is made in the same 32nm manufacturing process as Llano, the greatest win for Trinity are actual CPU and GPU performance improvements as well as impressive power consumption improvements when compared to Llano APUs.
Same as the FX-series desktop parts based on the Bulldozer architecture, AMD’s Trinity CPU part has a 2+1 integer/floating point design where you get two integer cores that share a single floating point scheduler. Although it appears to the OS as two cores, each Piledriver module actually has less resources than traditional core design. But with Piledriver, those Bulldozer kinks got ironed out as much as possible, improving IPC (instruction per cycle), reducing leakage, reducing CAC and giving it a slight frequency uplift.
As far as the GPU is concerned, we are looking at quite familiar Northern Islands VLIW4 part, a same one that was behind Cayman Radeon HD 6970 graphics card. Of course, the GPU has been cut down to up to 384 stream processors (organized in 6 SIMDs) with 24 texture units and 8 ROPs. The clocks have also gone down to 497MHz base clock that can “turbo” up to 686MHz.
Trinity Launching On Desktops This Summer
Comments Off on Trinity Launching On Desktops This Summer
AMD is expected to introduce its new mobile Trinity APU in a week or so and now we are hearing some timeframes for desktop parts as well.
According to Digitimes, desktop Trinity parts are coming in August, while Brazos 2.0 chips are expected in June. There is no word on Trinity ULV parts yet and we believe they will be the most interesting of the lot.
AMD’s Trinity To Have Fewer Cores
AMD’s soon to launch A10 5800K is a 100W quad-core Trinity 32nm CPU with 3.8 GHz base clock and 4.2GHz maximal clock possible with AMD turbo core dynamic overclocking technology.
The A10 5800K has 4MB of L2 cache, supports DDR3 1866, dual graphics configurations as well as AMD’s new FM2 socket. The fun part is new HD 7660D GPU that works at 800MHz and comes with 384 shader units. The current APU market leader A8 3870K that works at 3GHz has HD 6550 graphics with 400 cores running at 600MHz.
AMD claims that new Radeon cores from Trinity CPU including A10 5800K are more efficient and this is the main reason why you have fewer cores that can deliver superior performance. The other reason is that with 800MHz core clock they can probably process more data, meaning that HD 7660D of A10 5800K should end up quite a bit faster than the Llano A8 3870K.
All these Radeon cores are a key feature of the Vision Engine that accelerates GPU enabled applications. AMD also tells the world that Trinity is DirectX 11 compatible, supports Direct compute and the new A series of processors, including the A10 5800K all the way to dual-core A4 5300, should not have any issues playing Blu-ray 3D. The GPU part of Trinity supports AMD V, UVD3 as well as Open CL acceleration.